 |
 |
 |
|
Our breadbag has the same exact weaving as our original sample that was provided. It is an olive drab (copied from our original), water repellent, and canvas construction with tan webbing to hold the painted gray steel fittings. The bread bag is roughly, 10 1/2" tall and 12" wide, being wider at the bottom and tapering inward towards the top. The bread bag has a fold back, top flap with a horizontal, machine stitched seam. The top edge of the bread bag has 2 vertical, belt loop straps with webbing reinforcement with a single button closure to each corner and an additional central vertical strap with a riveted on steel belt hook, which is not correct. The central belt hook strap is well marked with a manufacturer and dated 1941. The breadbag also has two, web reinforced, steel D- rings to both the front and back, positioned near the top edge corners. The front D-Rings are for the canteen and mess kit. The back D-rings are for attaching the breadbag strap. The front of the fold back top flap also has two, small, horizontal, web loops stitched in place. The reverse interior of the fold back top flap has two, stitched on, button holed, vertical and web closure straps with corresponding dish buttons to the front center of the breadbag’s body. The breadbag has a single, large compartment interior with an additional stitched on, vertical, web closure strap with a corresponding dish button. The buttons are ORIGINAL steel dish type.
M31 Bread Bag Strap (Brotbeutelriemen)- Roughly, 116cm long, 30mm wide, dual-ply, feldgrau canvas construction carrying strap with black leather reinforced clips to each end. The webbing for the clip reinforcement panels are machine stitched and riveted in place. The two part strap has a rectangular, sliding, length adjustment buckle, and a separate rectangular joining clip. The strap has the machine stitched seams.
|
|
|
 |
|
 |
|